HammerTech Solutions A&A Gamma 4 All Metal Tool Overview

Welcome back, ePoolSupply supporters! We like to educate our customers with important information regarding their swimming pool and helpful technical tips to make informed decisions and make their pool maintenance that much easier. Today we will be going over HammerTech Solutions A&A Gamma 4 All Metal Tool Overview. Let's dive in!
About the Tool

HammerTech Solutions' brand new tools feature the world's first metal tool head, metal knuckle, and metal hardware. The knuckle can rotate a full 90 degrees for all the leverage you’ll need to remove heads from just about any condition and situation. The tools also feature a long adapter that inserts into your pool pole for easier reach and access to the pop-up heads without having to get into the pool! The adapter doubles as a handle if you need to get some leverage and torque on some older cleaning heads. Each tool is machine-milled in the United States and hand-assembled before undergoing quality assurance trials. The hard-anodized aluminum makes the tools far superior to anything on the market and an essential tool for weekend warriors, "do-it-yourselfers", and seasoned pool professionals alike. Each tool is sized with ease of use in mind. The tool itself will hold the pop-up heads in place for both removal and installation without having to worry about the pop-up head slipping off the tool and, unfortunately, falling into the deep end of your pool. This sleek and well-engineered line of tools will certainly outperform and outlast their metal or plastic counterparts at an exceptionally attractive price point.



If you have A&A’s plastic tool and are trying to do any removal, it is not recommended to use it because it will snap. The HammerTech tool has a longer handle and this will give you the opportunity to get a better grip on the head. Having the all-metal knuckle and the all-metal handle, you do not take the risk of having too much stress on the pivot point. The HammerTech Solutions All Metal A&A Gamma 4 Tool comes equipped with the necessary hardware to easily install the tool on a standard pool pole. Simply snap the butterfly clip in place and let the tool do the work! It can also be used as a hand tool! The anodized aluminum is meant to withstand most climates. A&A does have a good comparison metal tool to the HammerTech tool in hardware however it does not give you good maneuverability to move any farther to get a better torque.

HammerTech Tools outperforms A&A’s tool in every aspect. This sleek and well-engineered line of tools will certainly outperform and outlast their metal counterparts at an exceptionally attractive price point. If you are not sure which tool to go with please watch the video below. In this video, we walk you through an overview of the New All Metal HammerTech Solutions A&A Gamma Series 4 Installation/Removal Tool! This tool features the FIRST-EVER all-metal knuckle which gives you the ability to apply full torque on those old stubborn and sometimes stuck Caretaker pop-up heads. We also show you how easy it is to install these heads using this tool either by hand or with your pool pole, making it extremely easy to reach and handle the heads in the deeper portions of your pool. Providing professional insight as always along with any useful tips or tricks that may help you during this installation/removal process.


Please feel free to reach out to us directly with any questions you might have about your In-floor Pool Cleaning System and we'll be sure to assist you to the best of our abilities. Contact Us!

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.