Hayward TriVac 700 Top Assembly Kit - What's In The Box

Hello ePoolSupply supporters! For today's blog, I will be going over what comes in the box for Hayward’s TriVac 700 top assembly kit. I will also be going over a little bit about the cleaner and the product. At the bottom of this blog, I have attached a YouTube video of our pool professional showing you what comes exactly in the box and giving you some useful tips to help you replace this. If you want to learn more then keep on reading! 


About The Cleaner 


The TriVac 700 pressure cleaner is the only cleaner capable of skimming debris from the surface of the water in addition to vacuuming the pool floor, walls, and coves, which means Skimming is not required. Versatile and one-of-kind, TriVac 700 features patented AquaDrive technology powerful jets that propel the cleaner easily and efficiently around the pool. No matter the cleaning mode, AquaDrive helps the TriVac get the job done faster and with less wear and tear. 

About The Product 

The TriVac 700 top assembly kit (TVX7000TA-01) is a replacement part made by Hayward. The same high-quality materials were used to manufacture the original factory part. Making this a genuine OEM product. The top assembly is the main protective cover for the internal parts of the TriVac 700 while also housing a couple of its other key components that contribute to the removal of dirt and debris. There is an opening in the center with a blue dial that changes the cleaner from bottom skimming mode to top skimming mode which is an extraordinarily neat feature no other Hayward cleaner has. This assembly is white with an inner trim that is black with the TriVac 700 logo printed in black on its side. It rests above the foam kit and covers the entire cleaner from front to rear ensuring the protection of the internals. They also designed a handle at its top center making it convenient to remove the pressure cleaner from the pool when performing maintenance or needing to dispose of the contents that rest in the bag kit. 


What Comes In the Box


When you open the box, you will see the top assembly is surrounded by bubble wrap so the product stays protected. On the top of the product, you will see a hole that is meant for a dial that the pool cleaner has. On the bottom of the assembly, it has the float kits, it is just a piece of foam that is screwed in. It also comes with the tubes for your cleaner. If you have any questions about this product or need help please contact us and we can help you the best we can. 


In this video, our pool professional walks you through everything that comes included in the box when purchasing a Hayward TriVac 700 Top Assembly Kit (TVX7000TA-01). The top assembly is the main protective cover for the internal parts of the TriVac 700 while also housing a couple of its other key components that contribute to the removal of dirt and debris. There is an opening in the center with a blue dial that changes the cleaner from bottom skimming mode to top skimming mode which is an extraordinarily neat feature no other Hayward cleaner has.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.