A&A Style 2 In-Floor Cleaning Pop Up Head - Overview

A&A Style 2 In-Floor Cleaning Pop Up Head - Overview

Hello there! We're back today with another wonderful blog overview. Periodically we like to inform our customers of the newest updates in the swimming pool industry. Whether it be a simple "who's who" or maybe even a recent update to equipment. This week we will be discussing the A&A Style 2 Infloor Pop Up Cleaning Heads. Let's dive in!

First we'd like to talk about how an Infloor System works. There are many different versions of in floor cleaning systems out there however, the principal operation for each manufacturer is roughly the same. As with any pool, the water is circulated through a system of suction lines, run through a filter, and returned back into the pool through various pool jets and water features. This is where the infloor system comes in. Once the water has been filtered, it is driven through an actuator which disperses the water at high pressure to a designated "zone" of three to five cleaning heads. These heads "pop up" from the pool floor and spray dirt & debris towards the main suction drain.

A&A Style 2 Pop Up Cleaning Head

Style 2 is one of the most popular Pop-Up heads on the market. First released in 1994, the A&A Style 2 continued the legacy A&A started; providing pool owners an ease-of-mind when it comes to pool maintenance. Over the years A&A has used many names such as Jet Clean, Quick Clean, and Magna Sweep on the Style 2 however, they are all the same pop up head as long as they use a 3-Prong Tool configuration. The cleaning heads measure 2.25" across the top and 4" from the bottom spring to the top cap.


Each A&A Style 2 Infloor Pop Up Head rotates through twelve positions ensuring 360-degree coverage. The High Flow heads feature a 7/16" orifice to maximize cleaning power. The Low Flow heads feature a 1/4" orifice to ensure proper cleaning pressure. High Flow pop ups are meant for floor installation to ensure a bigger cleaning radius. Low Flow pop-ups are meant for steps & benches, the smaller output creates the perfect pressure for those hard-to-reach areas.

The cleaning heads are easily removed and installed from the Style 2 Collars with the A&A Style 2 Tool. We also carry brand new OEM Round O-Rings to guarantee a tight seal and prevent debris from entering the floor fitting.

A&A still produces these parts today and offers them in 8 Colors:

  • White
  • Gray
  • Black
  • Tan
  • Dark Blue
  • Vinyl Blue
  • Lt. Gray
  • Gold


If the Style 2 cleaning head keeps dislodging itself from the floor fitting, try 1 wrap of electrical tape around the locking tabs on the pop up to help it grip the collar better.


Check out the video below for a full breakdown of the A&A Style 2 Infloor Cleaning Heads as well as a sneak peak to our next blog on the updated Gamma 2's!

As you can see from the picture & video above, the A&A Style 2 continues to be one of the most effective infloor pool cleaning heads on the market. Please feel free to reach out to us directly with any questions you might have about your A&A Style 2 Infloor Pool Cleaning Heads. We're happy to help!


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.