ARG Air Relief Valve Replaces 98209803 | Filter Vent | ARP9823
Couldn't load pickup availability
- SKU: ARP9823
- UPC or GTIN: N/A
- Brand: ARG
- Product Type: Filter air relief / vent valve
- Replaces: OEM air relief 98209803 (verify with filter parts diagram)
- Power Source: Manual
- Compatible Product(s): Pool and spa filters that list part 98209803 as the air relief valve
- Dimensions/Weight: N/A
Always match this valve to your filter by part number, not just by appearance. If your parts diagram or existing vent calls out 98209803, ARP9823 is the intended replacement style. When you replace the air relief, it’s also a good time to inspect the pressure gauge and tank clamp O-ring so the entire filter assembly seals and vents correctly.
- ARG Air Relief Valve Replaces 98209800 | ARP9820
- ARG Air Relief Assy Replaces DEX2420MAR2 with Gauge | ARHDEX2
Q: How do I confirm this is the right valve?
A: Check your filter’s parts list or the stamping on the existing vent. If it specifies air relief 98209803, ARP9823 is the matching replacement.
Q: Do I need to drain the filter to change the air relief?
A: You must fully relieve pressure before removal; expect some water in the tank and minor spillage. Follow the filter manufacturer’s service instructions.
Q: My system still pulls air after replacing the valve—why?
A: A new air relief fixes venting and sealing at the filter top. Ongoing air in the system usually points to suction-side leaks, low water level, or pump issues that need separate troubleshooting.
Delivery and Shipping
Delivery and Shipping
- FREE SHIPPING IN THE USA
- WORLDWIDE SHIPPING AVAILABLE
- 30 DAY RETURNS
- UPGRADED | EXPEDITED SHIPPING AVAILABLE
Description
Description
ARG Air Relief Valve Replaces 98209803 | Filter Vent | ARP9823
ARG ARP9823 air relief valve replacing OEM 98209803. Manual filter vent bleeds trapped air and restores a clean, leak-resistant top-port seal.
Features
- Replacement air relief valve for filters that originally used OEM part 98209803
- Manual vent allows trapped air to be bled from the filter tank on startup or after service
- Helps quiet the system and reduce air hammer and pressure surging
- Restores a proper, leak-resistant seal at the filter’s top air-relief port
- Compact design sits cleanly at the filter top without interfering with nearby plumbing
- Direct swap into the same opening as the original 98209803-style vent (verify in your parts list)
Description
The ARG ARP9823 Air Relief Valve is built to take the place of aging filter vents identified by OEM part number 98209803. As air relief valves weather and wear, they become harder to turn, start seeping around the stem, or stop venting air cleanly. That leaves air pockets trapped in the filter tank, which makes the system noisy, unstable, and less safe to open.
Swapping to ARP9823 restores a predictable bleed point at the top of the filter. On startup or after service, you open the valve, purge air until the water stream runs solid, then close it and let the filter run. It’s a small, low-cost fix that eliminates hissing, weeping and stubborn vents without touching the rest of the equipment pad.
Pro Tip
Any time you pull the filter apart for a full cartridge or grid clean, inspect the air relief. If it’s chalky, cracked or a fight to turn, replace it while the system is already down. Always shut off the pump and fully depressurize the filter before removing or installing any air relief valve—don’t assume it’s safe just because the pump is off.
Technical Specifications
| SKU | ARP9823 |
| UPC or GTIN | N/A |
| Brand | ARG |
| Model | Air Relief P 98209803 |
| Product Type | Filter air relief / manual vent valve |
| Size / Connection | Top-mounted air-relief port sized to replace OEM 98209803 (verify thread/port style with filter parts list) |
| Materials | N/A |
| Power Source | N/A (manual) |
| Compatible Product(s) | Pool and spa filters whose parts diagram specifies air relief valve 98209803 |
| Dimensions/Weight | N/A |
| Warranty | N/A (see seller/manufacturer terms) |
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.
