ARG Air Relief Valve Replaces Hayward DEX2400S | Filter Vent | ARHDEX0
Couldn't load pickup availability
- SKU: ARHDEX0
- Brand: ARG
- Product Type: Filter air relief / vent valve
- Replaces: Hayward air relief DEX2400S (verify with filter parts diagram)
- Power Source: Manual
- Compatible Products: Pool and spa filters originally equipped with DEX2400S-style vents
- UPC/GTIN: N/A
Use this valve only where your Hayward filter's parts list or the old vent identify DEX2400S as the correct air relief. Matching the part number matters—using the wrong valve style or thread can lead to leaks or poor venting. When you replace the air relief, it's also a good time to check the pressure gauge and tank O-ring.
- ARG Air Relief Valve Replaces CCX1000V | ARHCCX
- Filter Tank Clamp / Body O-Ring (model-specific) | N/A
Q: How do I confirm this is the right replacement for my filter?
A: Check the parts diagram or the marking on your existing air relief. If it calls out Hayward DEX2400S, ARHDEX0 is the correct style replacement.
Q: Do I need to drain the filter to change the air relief?
A: You must fully relieve pressure before removal; some water will still be present in the tank, so be ready for light spillage. Follow your filter manufacturer’s instructions.
Q: My filter still gurgles after installing a new valve—what next?
A: A new air relief fixes venting at the top port. Persistent gurgling may indicate suction-side air leaks, low water level, or other system issues that need further troubleshooting.
Delivery and Shipping
Delivery and Shipping
- FREE SHIPPING IN THE USA
- WORLDWIDE SHIPPING AVAILABLE
- 30 DAY RETURNS
- UPGRADED | EXPEDITED SHIPPING AVAILABLE
Description
Description
ARG Air Relief Valve Replaces Hayward DEX2400S | ARHDEX0
ARG ARHDEX0 air relief valve to replace Hayward DEX2400S. Manual filter vent to purge trapped air and restore a clean, reliable seal.
Features
- Replacement air relief valve for filters that originally used Hayward DEX2400S
- Manual vent allows trapped air to be bled from the filter tank on startup
- Helps quiet the system and reduce air hammer and surging pressure
- Restores a proper, leak-resistant seal at the filter's top air-relief port
- Compact design stays clear of plumbing and yard debris around the filter top
- Direct swap for worn or cracked DEX2400S-style air relief valves (verify with your parts list)
Description
The ARG Air Relief Valve ARHDEX0 is a straightforward replacement for aging Hayward air vents stamped or listed as DEX2400S. Over time, the OEM valve can become difficult to turn, seep around the stem, or stop venting properly. That leaves air pockets trapped in the filter tank, which can make the system noisy, unstable, and harder to service safely.
Replacing that old vent with a fresh ARHDEX0 restores normal operation at the filter's top port. You open the valve to purge air when the pump starts, wait until you see a solid, air-free stream of water, then close it and let the filter run. It’s a small part, but it’s critical for both comfort and safety whenever you’re working on or restarting the system.
Pro Tip
Any time you shut down for a full filter clean, inspect the air relief. If it’s chalky, cracked, or difficult to operate, swap it now. It’s much easier—and cheaper—than tracing down a “mystery” hiss or air problem later. Always fully depressurize the tank before removing or installing an air relief valve.
Technical Specifications
| SKU | ARHDEX0 |
| UPC or GTIN | N/A |
| Brand | ARG |
| Model | Air Relief H DEX2400S Replacement |
| Product Type | Filter air relief / manual vent valve |
| Size / Connection | Replaces Hayward DEX2400S-style air relief at the top filter port (thread/port style per Hayward filter) |
| Materials | N/A |
| Power Source | N/A (manual) |
| Compatible Product(s) | Pool and spa filters whose parts breakdown specifies Hayward air relief DEX2400S |
| Dimensions/Weight | N/A |
| Warranty | N/A (replacement part; see seller/manufacturer terms) |
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.