CMP 4-inch Equalizer Suction Replacement Cover, White | 25207-020-000
25207-020-000: white 4-inch equalizer suction replacement cover. “Fiberglass” describes the intended pool/fitting application; it is not a claim about cover resin. One white replacement cover. The complete fitting, sump or body, gaskets, installation nut and replacement fastening hardware are separate items. Use the exact manufacturer-specified hardware for the actual assembly. The manufacturer lists this cover as key 3 for both CMP 25207-700-000 (2-inch insider) and CMP 25207-800-000 (1½-inch MIP) equalizer assemblies. These connection sizes describe the complete fittings; this cover has no plumbing connection. The complete equalizer fitting is for submerged wall installation connected only to a skimmer. Do not use it as a direct pump suction or a floor drain. The manufacturer specifies replacement of the cover and screws at least every seven years from installation, or sooner for damage or deterioration. Stop use of the pool or spa when a cover or attachment is loose, missing, cracked or otherwise unsafe; a qualified pool professional must inspect and restore the approved assembly before use. Follow the manual’s fastening procedure and torque limit; do not use power tools. The complete assembly’s rated flow depends on its approved configuration, installation and markings. A replacement cover alone does not establish the permitted system flow or certify an entire pool. The complete equalizer fitting is for submerged wall installation connected only to a skimmer. Do not use it as a direct pump suction or a floor drain. The linked manufacturer family compliance certificate identifies the covered assembly family; confirm the actual product markings and current installation requirements. CMP’s standard limited warranty covers defects in materials and workmanship for one year from original purchase unless otherwise noted, subject to its conditions and exclusions. The linked warranty statement limits coverage to the United States. The seven-year service interval is a replacement requirement, not a seven-year warranty.Product FAQs
What are the identifying specifications?
What is supplied?
Which assemblies use this cover?
Where may the complete assembly be used?
When should the cover and screws be replaced?
Does this cover establish a system flow rating?
What manufacturer warranty applies?
The manufacturer lists this cover as key 3 for both CMP 25207-700-000 (2-inch insider) and CMP 25207-800-000 (1½-inch MIP) equalizer assemblies. These connection sizes describe the complete fittings; this cover has no plumbing connection. The complete equalizer fitting is for submerged wall installation connected only to a skimmer. Do not use it as a direct pump suction or a floor drain.Compatibility
Delivery and Shipping
Delivery and Shipping
- FREE SHIPPING IN THE USA
- WORLDWIDE SHIPPING AVAILABLE
- 30 DAY RETURNS
Description
Description
CMP · 25207-020-000
4-inch Equalizer Suction Replacement Cover, White
Replace the separately numbered white suction cover on the matching CMP skimmer equalizer fitting. This listing identifies the cover rather than the complete wall fitting or drain assembly.
Match the complete suction fitting
The manufacturer lists this cover as key 3 for both CMP 25207-700-000 (2-inch insider) and CMP 25207-800-000 (1½-inch MIP) equalizer assemblies. These connection sizes describe the complete fittings; this cover has no plumbing connection.
The complete equalizer fitting is for submerged wall installation connected only to a skimmer. Do not use it as a direct pump suction or a floor drain.
One white replacement cover. The complete fitting, sump or body, gaskets, installation nut and replacement fastening hardware are separate items. Use the exact manufacturer-specified hardware for the actual assembly.
The image is the original manufacturer illustration of this cover.
See Specifications, Product FAQs, Compatibility and Resources for identification, replacement intervals and manufacturer instructions.
Specifications
Specifications
-
SKU
-
Product Type
-
Size/Connection
-
Compatibility
-
Warranty
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.
