ARG Air Relief Valve Replaces 273550 | Filter Vent | ARP2730
Couldn't load pickup availability
- SKU: ARP2730
- UPC or GTIN: N/A
- Brand: ARG
- Product Type: Filter air relief / vent valve
- Replaces: OEM air relief 273550 (verify with filter parts diagram)
- Power Source: Manual
- Compatible Product(s): Pool and spa filters that list part 273550 as the air relief valve
- Dimensions/Weight: N/A
Match this valve to your filter by part number, not just by looks. If your parts diagram or existing vent calls out 273550, ARP2730 is the intended replacement style. When you replace the air relief, it’s also a good time to inspect the pressure gauge and tank clamp O-ring so the entire filter assembly seals and vents correctly.
- ARG Air Relief Valve Replaces 154689 | ARP1549
- ARG Air Relief Assy Replaces DEX2420MAR2 with Gauge | ARHDEX2
Q: How do I confirm this is the right valve?
A: Check your filter’s parts list or the marking on the existing vent. If it specifies air relief 273550, ARP2730 is the matching replacement.
Q: Do I need to drain the filter to change the air relief?
A: You must fully relieve pressure before removal; expect some water in the tank and minor spillage. Follow the filter manufacturer’s service instructions.
Q: My system still pulls air after replacing the valve—why?
A: A new air relief fixes venting and sealing at the filter top. Ongoing air in the system usually points to suction-side leaks, low water level, or pump issues that need separate troubleshooting.
Delivery and Shipping
Delivery and Shipping
- FREE SHIPPING IN THE USA
- WORLDWIDE SHIPPING AVAILABLE
- 30 DAY RETURNS
- UPGRADED | EXPEDITED SHIPPING AVAILABLE
Description
Description
ARG Air Relief Valve Replaces 273550 | ARP2730
ARG ARP2730 air relief valve replacing OEM 273550. Manual filter vent bleeds trapped air and restores a clean top-port seal.
Features
- Replacement air relief valve for filters that originally used OEM part 273550
- Manual vent allows trapped air to be bled from the filter tank on startup
- Helps quiet the system and reduce air hammer and pressure surging
- Restores a proper, leak-resistant seal at the filter’s top air-relief port
- Compact design sits cleanly at the filter top without interfering with plumbing
- Direct swap into the same opening as the original 273550-style vent (verify in your parts list)
Description
The ARG ARP2730 Air Relief Valve is built to replace aging filter vents identified by OEM part number 273550. As air relief valves weather and wear, they can become stiff to turn, start seeping around the stem, or stop venting air cleanly. Air pockets trapped in the filter tank make the system noisy, unstable and less safe to open.
Dropping in ARP2730 restores a predictable bleed point at the top of the filter. On startup or after service, you open the valve, purge air until the water stream runs solid, then close it and allow the filter to run normally. It’s a quick, low-cost way to get rid of hissing, weeping and stubborn vents without touching the rest of the equipment.
Pro Tip
Any time you do a full cartridge or grid clean, inspect the air relief. If it’s chalky, cracked or hard to operate, replace it now while the system is already down. Always shut off the pump and fully depressurize the filter before removing or installing any air relief valve—never assume the tank is safe just because the pump is off.
Technical Specifications
| SKU | ARP2730 |
| UPC or GTIN | N/A |
| Brand | ARG |
| Model | Air Relief P 273550 |
| Product Type | Filter air relief / manual vent valve |
| Size / Connection | Top-mounted air-relief port sized to replace OEM 273550 (verify thread/port style with filter parts list) |
| Materials | N/A |
| Power Source | N/A (manual) |
| Compatible Product(s) | Pool and spa filters whose parts diagram specifies air relief valve 273550 |
| Dimensions/Weight | N/A |
| Warranty | N/A (see seller/manufacturer terms) |
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.