ARG Gunite Jet Double Tee Spigot | Gunite Spa Fitting | GJD01
Couldn't load pickup availability
Brand & System Insights
ARG manufactures gunite spa jet bodies and fittings used in custom gunite spas and pools. The GJD01 Double Tee Spigot is a behind-the-shell body that routes water and air to compatible jet faces and wall fittings, similar in function to common gunite double tee jet bodies from other brands.
Because the tee becomes part of the structure, correct sizing and support are critical. Always compare the new body to the old one for pipe size, port spacing, and orientation before install.
Warranty: Specific extended warranty terms are not published for this individual fitting. Treat coverage as N/A beyond any standard manufacturer parts policy and your seller’s return policy.
Related Gunite Jet Components
- ARG Gunite Wall Fitting — 1.5" (Dark Gray) | GF015DG
- ARG Gunite Wall Fitting — 1.5" (Gray) | GF015GR
- ARG 3/4" Eye x 1.5" MIP Eyeball Return Fitting (Gray) | EFM015DGR
- ARG 3/4" Eye x 1.5" MIP Eyeball Return Fitting (Black) | EFM015DBK
Use these components with the tee body to complete the gunite spa jet assembly and tune flow at the wall.
FAQs
Q: What size pipes does this double tee spigot accept?
A: Size and connection details are not published. Match this body to your existing tee and verify pipe outside diameter, schedule, and spigot engagement before purchase. If dimensions do not match, consider it N/A for your system.
Q: Will this replace a Waterway or CMP double tee body?
A: Only if the water and air port sizes, spacing, and overall dimensions match. Do a side-by-side comparison of the old body and confirm all spigot sizes and orientations before installing it as a cross-brand replacement.
Delivery and Shipping
Delivery and Shipping
- FREE SHIPPING IN THE USA
- WORLDWIDE SHIPPING AVAILABLE
- 30 DAY RETURNS
- UPGRADED | EXPEDITED SHIPPING AVAILABLE
Description
Description
ARG Gunite Jet Double Tee Spigot | Gunite Spa Fitting | GJD01
Gunite spa jet double tee spigot body for ARG jets. Creates a durable water/air junction behind the shell and supports stable jet pressure. SKU GJD01.
Features
- Double tee spigot jet body for gunite spa jet plumbing loops
- Provides a solid water/air junction behind the shell for ARG-style jet faces
- Spigot connections designed for solvent-weld joints, not loose threaded adapters
- Helps keep jet pressure consistent across multiple seats when plumbed correctly
- Intended as a permanent in-shell fitting—match size and layout to your existing tee
Description
The ARG Gunite Jet Double Tee Spigot is the main body that feeds many gunite spa jet systems. Installed behind the spa shell, it splits the plumbing run so both water and air can be delivered to connected jet fittings. A rigid tee body, glued and supported correctly, helps prevent hidden seepage behind gunite and keeps jet pressure balanced from seat to seat. Spigot-style ends let you solvent-weld the body directly into your plumbing loop for a long-term, low-maintenance connection. Because exact dimensions and port sizes are not published, you should always compare this tee to your existing body and confirm pipe sizes and layout before committing it into the wall.
Pro Tip
Before you glue anything, build the full loop dry and pressure-test with a temporary manifold. Once you know the system holds pressure, mark orientations, glue each joint with fresh primer and cement, and support the assembly while it cures. Only bury or gunite over the tee after it passes a pressure test.
Related Parts
- ARG Gunite Wall Fitting — 1.5" (Dark Gray) | GF015DG
- ARG Gunite Wall Fitting — 1.5" (Gray) | GF015GR
- ARG 3/4" Eye x 1.5" MIP Eyeball Return Fitting (Gray) | EFM015DGR
- ARG 3/4" Eye x 1.5" MIP Eyeball Return Fitting (Black) | EFM015DBK
Installation Tips
Shut down and lock out equipment before working on spa plumbing. Dry-fit the plumbing loop and confirm clearances in the steel and gunite envelope. Match the tee to your existing pipe size and layout; if dimensions do not match, do not force or adapt it in the wall. Use fresh primer and cement, support all branches while curing, and pressure-test the circuit to operating pressure or as required by local code before gunite, backfill, or finish work.
Specifications
Specifications
-
UPC or GTIN
-
Product Type
-
Size/Connection
-
Materials
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.
