Jandy CC Series 300 Sq. Ft. Quad Cartridge Pool Filter | CC300

CC300 is the 300-square-foot residential CC Series quad cartridge filter. The rating identifies this complete filter model, not an individual replacement element.

No. CC filtration uses four replaceable cartridge elements. The circulation pump and other equipment are separate from the filter.

Jandy identifies CC300 as a replacement for Pentair Clean & Clear Plus CCP320 using the Pentair-style inlet/outlet spacing and union connections. This refers to replacing the complete filter, not interchanging internal cartridges or repair parts. Have a qualified pool professional verify plumbing, space and service clearance before installation.

Maximum operating pressure is 50 psi. A qualified professional must size the complete system and follow the manual’s installation and pressure-release procedures. Never open or adjust a pressurized filter.

Record clean starting pressure. The CC manual calls for cleaning when pressure rises 10–12 psi above that baseline, while remaining below the 50 psi operating limit. Shut down the system and fully release pressure before service; follow the complete manual.

The CC addendum lists R0357200 — gauge/air release assembly; R0357400 — tank clamp assembly; R0523000 — drain cap assembly. These are separately sold service components. Match cartridge and upper-tank replacement kits to the exact filter model using the CC parts diagram.

Jandy’s manufacturer limited warranty excludes whole equipment purchased through the internet or other ecommerce platforms. The sell sheet’s general one-year statement does not establish coverage for an online purchase. Review Jandy’s current limited warranty and confirm the applicable purchase and professional-installation conditions with Jandy.