Jandy VersaTemp 130K BTU (1-Phase) Heat/Chill Pump | JRT3000R
In-store pickup or delivery only
Call (602) 274-7946
It has heating and chilling functions, but performance depends on air and water temperatures, humidity and installation. Do not assume the rated heating output is available in every season. The manual includes pools using saltwater chlorine generators, with salt content no higher than 4,500 ppm and the stated water-chemistry, flow and sanitation-device placement requirements. Titanium does not remove the need to maintain correct water chemistry. The water connections use 2-inch PVC unions. Have the installer confirm the full plumbing design and flow requirements in the manual. Use the model-specific specifications and manufacturer documents on this listing to compare the equipment and confirm the correct configuration before ordering.Can it heat and chill?
Is it suitable for saltwater pools?
Does it require 2-inch plumbing?
Why Choose ePoolSupply.com?
Electrical supply: 230 VAC, 60 Hz, single-phase. The technical table lists 32.5 A running-load current, 40 A minimum circuit ampacity and 50 A maximum overcurrent protection. These are different ratings; have the installer use the unit nameplate and exact wiring instructions. Dimensions: 45 in high × 32 in × 32 in. Unit weight: 252 lb. The 2-inch PVC water connections use unions. Minimum flow is 30 GPM, optimum 57 GPM and maximum 70 GPM.
Heating and chilling; 1-phase electrical supply. Heating output depends on ambient conditions, water temperature and installation. A qualified installer must size the unit and verify electrical service, airflow clearances, flow and water chemistry. This is an electrically powered heat pump, not a hybrid gas/electric heater. Rated heating output is 130,000 BTU and COP is 5.8 at 80°F air, 80% relative humidity and 80°F water, in accordance with AHRI 1160. These are test-condition ratings, not all-weather guarantees.
Call (602) 274-7946
Jandy VersaTemp 130K BTU (1-Phase) Heat/Chill Pump | JRT3000R
Description
Description
Jandy | JRT3000R
VersaTemp 130,000 BTU Heat/Chill Pump, 1-Phase
Jandy JRT3000R is a 1-phase VersaTemp electric heat pump that heats and chills pool or spa water.
Match the exact configuration
Heating output depends on ambient conditions, water temperature and installation. A qualified installer must size the unit and verify electrical service, airflow clearances, flow and water chemistry. This is an electrically powered heat pump, not a hybrid gas/electric heater. Rated heating output is 130,000 BTU and COP is 5.8 at 80°F air, 80% relative humidity and 80°F water, in accordance with AHRI 1160. These are test-condition ratings, not all-weather guarantees.
Model specifications
Electrical supply: 230 VAC, 60 Hz, single-phase. The technical table lists 32.5 A running-load current, 40 A minimum circuit ampacity and 50 A maximum overcurrent protection. These are different ratings; have the installer use the unit nameplate and exact wiring instructions. Dimensions: 45 in high × 32 in × 32 in. Unit weight: 252 lb. The 2-inch PVC water connections use unions. Minimum flow is 30 GPM, optimum 57 GPM and maximum 70 GPM.
The titanium twisted-coil heat exchanger, digital controls, swept-wing fan and compressor acoustic blanket support heating/chilling operation. Install outdoors, following the manufacturer’s clearances and water-chemistry limits. Do not assume a fixed heat-up time, cost saving or all-weather performance.
Have a qualified professional confirm the equipment nameplate, part number and installation requirements. Review the 2026 manufacturer model and parts reference and the manual in Resources & PDF Downloads.
Specifications
Specifications
-
SKU
-
Product Type
-
Size/Connection
-
Materials
-
Power Source
-
Dimensions45 in, 32 in, 32 in
-
Weight
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.
