Pentair Dorado Inground Suction Pool Cleaner | 360151
Pentair identifies it as an inground suction-side cleaner for floors and walls. Confirm the appropriate skimmer or dedicated suction connection, inspect the pool finish and follow the installation guide before use. It is the width of the cleaning path and bristle scrubbers. It is not a verified set of overall body dimensions or a pool-size limit. The guide lists a supplied flow gauge. With the hose and gauge submerged, adjust the vacuum regulator until the gauge indicator is between MIN and MAX, then follow the guide to connect the leader hose. Use the correct procedure for your skimmer or dedicated suction installation. The guide describes twelve hose sections, including the special leader that connects to the swivel. The assembled hose should reach the farthest point from the suction source plus at least four feet. Do not cut the sections; use the correct Dorado-compatible hose and follow the full setup instructions. No. The guide excludes automatic step and swim-out cleaning, use beneath a solar cover and initial pool cleanup. Shape, flow and hose setup affect coverage, so some areas can require manual cleaning. Disconnect the hose and lay it flat and straight, rather than coiling it. Store the cleaner so its bristles are not compressed or deformed, with the lift brush retracted. Stop the pump before removing or servicing the cleaner and follow the maintenance guide.Product FAQs
Which pool is Dorado 360151 designed for?
What does the 15-inch measurement describe?
How do I set the cleaner’s operating flow?
How should I choose the hose length?
Does Dorado automatically clean steps and swim-outs?
How do I store the cleaner and hose?
Pentair Dorado 360151 is an inground suction cleaner with a 15-inch cleaning path, Bristle-Drive scrubbing and oscillator-powered SmartTrac steering. The 15-inch value describes cleaning width, rather than overall body dimensions. Follow the guide for the appropriate skimmer or dedicated suction connection, correct leader hose and regulator. Use the supplied flow gauge to set the indicator between MIN and MAX. Size the hose to reach the farthest point plus at least four feet, without cutting hose sections. Inspect the pool finish before use. Dorado is not designed to automatically clean steps or swim-outs, perform initial pool cleanup or operate beneath a solar cover; some areas can need manual attention.Compatibility
Bristle-Drive scrubbing, a 15-inch cleaning path and SmartTrac steering are listed for this suction-side inground cleaner. The cleaning-path width is not the overall body dimension. Follow the full guide for pool-finish inspection, hose setup and operating flow.Specifications
Call (602) 274-7946
Description
Description
Pentair | 360151
Dorado Inground Pool Cleaner
The Pentair 360151 is the Dorado Inground Pool Cleaner. It is listed for inground pools. Bristle-Drive scrubbing, a broad 15-inch cleaning path and SmartTrac steering work together for suction cleaning.
Before you order
Confirm Dorado model 360151 for an inground pool and a suitable skimmer or dedicated suction connection. Inspect the pool finish, use the correct leader hose and regulator, and set flow with the supplied gauge. Review the guide’s coverage and surface-care limits before installation.
Product overview
Dorado combines bristle scrubbing with a large vacuum inlet to loosen and remove debris from inground pool floors and walls. Its oscillator powers SmartTrac programmed steering, while the 15-inch cleaning path helps cover more surface in each pass. Adjust the hose and operating flow for your pool, and keep the filter system clear to support consistent movement.
Cleaning features
- 15-inch-wide bristle scrubbing path.
- Bristle-Drive action loosens dirt for suction removal.
- Oversized vacuum inlet handles small and larger debris.
- Oscillator-powered SmartTrac programmed steering.
- Connects through the appropriate cleaner hose and suction setup.
Choose the right configuration
Confirm manufacturer reference 360151 and review the specifications, supplied components and any required accessories. Use the manufacturer instructions to check that this exact configuration suits your pool system.
Safety and handling: Read the complete installation guide. Stop the pump before connecting, disconnecting or servicing the cleaner and keep swimmers out while it runs. Inspect liners, loose tiles and fittings before use. The cleaner is not designed for automatic step or swim-out cleaning, initial pool cleanup or use beneath a solar cover. Keep the regulator and hose submerged during setup and follow the full suction-port safety instructions.
Existing product videos
See Compatibility, Specifications, Resources & PDF Downloads and Product FAQs for product details and support references.
Model and part details
Pentair 360151 is the dorado inground suction pool cleaner listed for Dorado model 360151.
Bristle-Drive scrubbing, a 15-inch cleaning path and SmartTrac steering are listed for this suction-side inground cleaner. The cleaning-path width is not the overall body dimension. Follow the full guide for pool-finish inspection, hose setup and operating flow.
Specifications
Specifications
-
SKU
-
UPC or GTIN
-
Product Type
-
Size/Connection
Product Warranty
Product Warranty
We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:
- Pentair Warranty
- A&A (Pentair In-Floor) Warranty
- Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
- Paramount Warranty
- BlueSquare Warranty
- Hayward Warranty
- All Other Manufacturer Warranties
Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.
Price Match Guarantee
Price Match Guarantee
Payment & Security
Payment methods
Your payment information is processed securely.
EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.



