Polaris Vac-Sweep 360 In-Line Back-up Valve | 9-100-1200

Polaris 360 Backup Valve (9-100-1200)

The in-line Polaris 360 backup valve is a genuine OEM product. This replacement part is made by Polaris.

This backup valve was designed to be the feature that backs the Polaris 360 pressure side cleaner out of any corners or edges along with the pool steps which would cause the cleaner to be hung up or impeded. Without it, the cleaner would be insufficient in its ability to suck and pull up dirt and debris off your pool's surface.

This part is white and should be located approximately 18 inches from the head of the cleaner and will turn on every 2 ½ to 3 minutes to pull the cleaner out of tight corners or trouble spots. A great troubleshooting tip if the cleaner is tangled up via the hoses or floating at the top of the pool water would be to check this backup valve to see if it is operating correctly, start by pulling the cleaner out of the water. It should run for approximately 30 seconds, if it runs longer than this then it means the internal mechanism has failed and is stuck in the open position. Just make sure you are purchasing the full assembly with the mechanism included, replacing just the outer case will not correct this issue. You can also purchase just the mechanism itself here on our site.

Works with the Polaris Vac-Sweep 360 Pressure-Side Pool Cleaner.

Need replacement parts? Find Polaris 360 Parts here. 

We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:

• Pentair Warranty
  
• A&A (Pentair In-Floor) Warranty
  
• Fluidra Warranty (Zodiac / Jandy / Polaris / Caretaker)
  
• Paramount Warranty
  
• BlueSquare Warranty
  
• Hayward Warranty
  
• All Other Manufacturer Warranties
  

Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.