EPOOLSUPPLY - FROM OUR STORE TO YOUR DOOR

Pentair UltraTemp 140 Heat-Only Pool Heat Pump, Almond | 460934

Pentair  |  SKU: 460934  |  Barcode: 788379859794

In-store pickup or delivery only

Call (602) 274-7946

Ships to

Select your store

Pickup inventory reflects the selected variant.

Product FAQs
Is 460934 a heat-only or heat/cool model?
460934 is the almond UltraTemp 140 heat-only model. If you need cooling, compare the UltraTemp 140 H/C 460958; these are different configurations.
What is the rated heating output?
Pentair’s current manual and October 2024 brochure list 145,000 BTU/h and COP 5.8 at 80°F air, 80% relative humidity and 80°F water. At 80°F air/63% RH/80°F water, heating is 135,000 BTU/h; at 50°F air/63% RH/80°F water, it is 90,000 BTU/h. Older literature may show 143,000 BTU/h. Compare the rating conditions and your unit’s documentation.
What electrical supply and plumbing does it need?
The manual lists 208–230 VAC, single phase, 60 Hz, with 2-inch PVC connections and unions. Water flow must be 30–120 GPM, and maximum working water pressure is 50 psi. Use a qualified installer to check the nameplate, wiring, grounding, bonding and circuit protection. Follow the manual’s external-bypass requirement when pump power exceeds 2 HP or total flow exceeds 120 GPM.
Can it work with pool automation?
The manual documents relay-remote control and Pentair RS-485 connections, including EasyTouch and IntelliTouch. Confirm the controller, wiring and required settings for your installation. A compatible automation system is separate equipment; universal plug-and-play compatibility is not implied.
What does AutoSet do?
When correctly wired and configured, AutoSet can override the circulation-pump time clock to check water temperature and run circulation when heating is needed. The installation manual explains the required connection and operating settings.
How should I size it and plan the equipment pad?
Heat-pump performance depends on outdoor conditions, pool surface area, wind, heat loss, cover use and desired temperature. Provide outdoor airflow, drainage, service access and all manual clearances. Manufacturer documents give different cabinet dimensions, so verify the exact unit revision before building a tight pad or enclosure. Shipping measurements are not cabinet dimensions.
Where are the manual and replacement parts?
Use the Installation and User’s Guide in Resources & PDF Downloads for operating instructions and the parts diagram. Match the exact model, serial number and component revision before ordering service parts. This is a complete electric heat pump, not an UltraTemp ETi gas/electric hybrid heater.
What warranty applies?
Pentair lists two years for qualifying UltraTemp heat-pump purchases, ten years for the compressor and lifetime coverage for the titanium heat exchanger, subject to its terms. Internet purchases are listed separately as one-year parts-only coverage. Purchase route, professional installation and exclusions affect eligibility. Review Pentair’s current warranty terms before purchase.

Compatibility

460934: Almond UltraTemp 140, heat-only, single-phase. Black 460964, heat/cool 460958 and three-phase 460928 are separate configurations, not interchangeable ordering numbers.

Heating ratings: 145,000 BTU/h / COP 5.8 at 80°F air, 80% RH, 80°F water; 135,000 BTU/h / COP 5.6 at 80°F air, 63% RH, 80°F water; 90,000 BTU/h / COP 4.0 at 50°F air, 63% RH, 80°F water.

System requirements: 208–230 VAC, single-phase, 60 Hz; 2-inch PVC water connections with unions; 30–120 GPM; maximum working water pressure 50 psi. The manual calls for an external bypass if pump power exceeds 2 HP or total flow exceeds 120 GPM. Follow its complete piping instructions.

Controls: relay-remote and supported Pentair RS-485 integration, including EasyTouch and IntelliTouch. Confirm the interface and settings for the specific controller.

Installation: outdoor use with adequate airflow, drainage and service access. Size using local climate, pool area and heat loss. Cabinet dimensions differ between manufacturer documents; verify the actual unit revision before planning tight clearances. Use the nameplate and manual to size wiring and protection, rather than treating the brochure’s breaker column as a universal maximum.

Model and service notes

This listing is for the UltraTemp 140 460934 complete almond heat pump. It uses R410A refrigerant, a titanium heat exchanger and a composite cabinet. Refrigeration and electrical service require qualified personnel.

The manufacturer parts sheet covers multiple UltraTemp models. Match the model-specific row and component revision; parts for the UltraTemp ETi hybrid are not automatically compatible. See the linked parts sheet and the full installation manual before ordering.

Need heating and cooling? Compare the UltraTemp 140 H/C 460958.

Call (602) 274-7946

Description

Pentair UltraTemp 140 | 460934 | Almond

Electric heating for your pool and spa

The Pentair UltraTemp 140 is a complete, heat-only electric pool heat pump with a titanium heat exchanger and corrosion-resistant composite cabinet. Choose this almond model when you need pool or spa heating without the cooling function of the separate 140 H/C.

Titanium heat exchanger

Transfers heat from outdoor air to pool water using an electric refrigeration cycle. No gas supply is required.

Clear digital controls

An LCD menu and separate pool/spa temperature settings make everyday operation straightforward.

Automation options

Supports the remote-control connections described in the manual, including compatible Pentair control systems.

Compare output at the same conditions

Pentair lists 145,000 BTU/h heating at 80°F air, 80% relative humidity and 80°F water. Output falls as conditions change, so this rating does not guarantee a particular heating time or pool size.

Have a qualified installer check electrical supply, water flow and outdoor clearances. Confirm the exact cabinet revision before pad or enclosure work.

See Specifications for product details, Compatibility for installation limits, Resources & PDF Downloads for manuals, and Product FAQs for buying and support questions.

Specifications

  • SKU
    460934
  • UPC or GTIN
    788379859794
  • Product Type
    Electric Pool Heat Pump
  • Size/Connection
    145,000 BTU/h heating / COP 5.8 at 80°F air, 80% RH, 80°F water; 208–230 VAC, single-phase, 60 Hz; 2-inch PVC water connections with unions; 30–120 GPM; 50 psi maximum working water pressure.
  • Materials
    Titanium heat exchanger; composite cabinet
  • Power Source
    208-230 VAC

Product Warranty

We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:

Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.

Price Match Guarantee

Payment & Security

Payment methods

  • Ach Direct Debit
  • American Express
  • Apple Pay
  • Bizum
  • BLIK
  • Diners Club
  • Discover
  • EPS
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • Multibanco
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Twint
  • Union Pay
  • USDC
  • Visa

Your payment information is processed securely.

EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.