EPOOLSUPPLY - FROM OUR STORE TO YOUR DOOR

Pentair UltraTemp 140 H/C Heat/Cool Pool Heat Pump — Almond | 460958

Pentair  |  SKU: 460958  |  Barcode: 96348501

In-store pickup or delivery only

Call (602) 274-7946

Ships to

Select your store

Pickup inventory reflects the selected variant.

Product FAQs
Does this model heat and cool the water?
460958 is the almond UltraTemp 140 H/C with heating and cooling. It is not the separate 462032 Active Defrost model.
What is the rated heating output?
Pentair’s current manual and October 2024 brochure list 140,000 BTU/h and COP 5.6 at 80°F air, 80% relative humidity and 80°F water. At 80°F air/63% RH/80°F water, heating is 132,000 BTU/h; at 50°F air/63% RH/80°F water, it is 85,000 BTU/h. The brochure lists 71,000 BTU/h cooling in its 80/80/80 row.
What electrical supply and plumbing does it need?
The manual lists 208–230 VAC, single phase, 60 Hz, with 2-inch PVC connections and unions. Water flow must be 30–120 GPM, and maximum working water pressure is 50 psi. Use a qualified installer to check the nameplate, wiring, grounding, bonding and circuit protection. Follow the manual’s external-bypass requirement when pump power exceeds 2 HP or total flow exceeds 120 GPM.
Can it work with pool automation?
The manual documents relay-remote control and Pentair RS-485 connections, including EasyTouch and IntelliTouch. Confirm the controller, wiring and required settings for your installation. A compatible automation system is separate equipment; universal plug-and-play compatibility is not implied.
What does AutoSet do?
When correctly wired and configured, AutoSet can override the circulation-pump time clock to check water temperature and run circulation when heating is needed. The installation manual explains the required connection and operating settings.
How should I size it and plan the equipment pad?
Heat-pump performance depends on outdoor conditions, pool surface area, wind, heat loss, cover use and desired temperature. Provide outdoor airflow, drainage, service access and all manual clearances. Manufacturer documents give different cabinet dimensions, so verify the exact unit revision before building a tight pad or enclosure. Shipping measurements are not cabinet dimensions.
Where are the manual and replacement parts?
Use the Installation and User’s Guide in Resources & PDF Downloads for operating instructions and the parts diagram. Match the exact model, serial number and component revision before ordering service parts. This is a complete electric heat pump, not an UltraTemp ETi gas/electric hybrid heater.
What warranty applies?
Pentair lists two years for qualifying UltraTemp heat-pump purchases, ten years for the compressor and lifetime coverage for the titanium heat exchanger, subject to its terms. Internet purchases are listed separately as one-year parts-only coverage. Purchase route, professional installation and exclusions affect eligibility. Review Pentair’s current warranty terms before purchase.

Compatibility

460958: Almond UltraTemp 140 H/C electric pool/spa heat pump with heating and cooling. Black 460959, heat-only 140 and Active Defrost 462032 are separate configurations.

Published performance:

  • 80°F air / 80% relative humidity / 80°F water: 140,000 BTU/h heating, COP 5.6; the same manufacturer row lists 71,000 BTU/h cooling, COP 4.1.
  • 80°F air / 63% humidity / 80°F water: 132,000 BTU/h heating, COP 5.4.
  • 50°F air / 63% humidity / 80°F water: 85,000 BTU/h heating, COP 4.0.

Output changes with conditions. Pool area, climate, wind, heat loss and desired temperature affect sizing; a model name alone is not a heating-time or pool-volume guarantee.

Installation: 2-inch PVC connections with unions; the manual specifies 30–120 GPM and a 50 psi maximum working water pressure. It calls for an external bypass when circulation-pump power exceeds 2 HP or total flow exceeds 120 GPM. Follow the full piping instructions.

Electrical supply: the 140 H/C manual lists 208–230 VAC, single phase, 60 Hz. A qualified installer must use the actual nameplate and applicable codes to size wiring and circuit protection; do not treat a brochure’s breaker column as a universal maximum.

Controls and site: the manual documents relay-remote control and compatible Pentair RS-485 integration, including EasyTouch and IntelliTouch. Confirm the specific interface and settings. Provide the required outdoor airflow, drainage, service access and clearances.

Check dimensions before pad or enclosure work: cabinet measurements differ across manufacturer documents. The gallery drawing is a family reference; verify the actual unit revision and installation manual rather than relying on one brochure dimension.

Manufacturer heat/cool ratings and test conditions

Full installation, flow, electrical and clearance requirements

Model and service notes

This listing is for the UltraTemp 140 H/C 460958 complete almond heat pump. It uses R410A refrigerant, a titanium heat exchanger and a composite cabinet. Refrigeration and electrical service require qualified personnel.

The manufacturer parts sheet covers multiple UltraTemp models. Match the model-specific row and component revision; parts for the UltraTemp ETi hybrid are not automatically compatible. See the linked parts sheet and the full installation manual before ordering.

Need heat only? Compare the UltraTemp 140 460934.

Call (602) 274-7946

Description

Pentair | 460958

Heat or cool with the UltraTemp 140 H/C

This Almond UltraTemp 140 H/C is an electric heat pump for compatible pool and spa installations. Its titanium heat exchanger, composite cabinet and digital controls support temperature management in both heating and cooling modes.

Compare ratings at the same conditions

Pentair’s current reference table lists 140,000 BTU/h heating and 71,000 BTU/h cooling in its 80/80/80 row. Heating output drops as air conditions change; these figures do not promise a particular heating time for every pool.

A qualified installer should confirm the electrical supply, water flow, pad and airflow clearances. Cabinet dimensions differ across manufacturer documents, so verify the exact unit before planning a tight installation.

See Specifications for product details, Compatibility for installation limits, Resources & PDF Downloads for manuals, and Product FAQs for buying and support questions.

California Proposition 65: Warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Specifications

  • SKU
    460958
  • Product Type
    Electric Pool Heat Pump
  • Size/Connection
    140,000 BTU/h heating / COP 5.6 at 80°F air, 80% RH, 80°F water; 71,000 BTU/h cooling / COP 4.1 listed in the brochure’s 80/80/80 row; 208–230 VAC, single-phase, 60 Hz; 2-inch PVC water connections with unions; 30–120 GPM; 50 psi maximum working water pressure.
  • Materials
    Titanium heat exchanger; composite cabinet
  • Power Source
    208-230 VAC

Product Warranty

We want you to have quick and easy access to warranty information for all the brands we carry. Please click on the links below to view each manufacturer’s warranty page:

Note: Warranty coverage, registration, and service terms are provided directly by the manufacturer. Please review the details carefully to ensure proper understanding of coverage and claim procedures.

Price Match Guarantee

Payment & Security

Payment methods

  • Ach Direct Debit
  • American Express
  • Apple Pay
  • Bizum
  • BLIK
  • Diners Club
  • Discover
  • EPS
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • Multibanco
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Twint
  • Union Pay
  • USDC
  • Visa

Your payment information is processed securely.

EPOOLSUPPLY DOES not store credit card details nor have access to your credit card information.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
B
Bryce

These guys are awesome and make life easy for me